李鹏
教授/资源循环科学与工程系
个人联系信息
通讯地址：苏州市相城区济学路8号苏大阳澄湖校区
电子邮件：lipeng@suda.edu.cn
学习工作经历
李鹏，2008年毕业于北京科技大学，获无机非金属材料工程专业学士学位，2012年于瑞典皇家工学院（KTH）获冶金过程科学博士学位。2014年4月-2015年11月在中国石油大学（华东）任教。2015年入职苏州大学沙钢钢铁学院。先后主持国家自然科学基金两项，省自然科学基金一项，在国内外核心期刊如J. CO2. Util., J. Clean. Prod., Chem. Eng. J., Ceram. Int., Metall. Mater. Trans. B 等发表论文60余篇，授权发明专利10余项。此外担任J. Clean. Prod., J. Hazard. Mater., Ceram. Int., Metall. Mater. Trans. B 等期刊评审专家。
主要研究方向
1. 固废资源与余热协同：高温物相重构、能/质耦合转化利用
2. 微晶玻璃：熔铸过程温度-应力关系、可控晶化与烧结
3. 固废源功能材料制备与有价元素提取
承担科研项目
1. 基于粒化-氧化改质过程调控实现热态钢渣“能质”协同利用. 国家自然科学基金面上项目（No.52474441），主持
2. 热态钢渣冷却过程相转变与吸放热特性. 钢铁冶金及资源利用省部共建教育部重点实验室开放基金（FMRUlab25-09），主持
3. 铝再生熔炼过程热态铝渣水合制氢的基础研究. 国家自然科学基金青年项目 （No.51604178），主持
4. 微晶玻璃及其填缝剂的耐酸碱腐蚀性能，江西璞晶新材料股份有限公司，主持
5. 熔盐对热铝渣高温水和产氢的原位强化机制研究. 江苏省高等学院自然科学研究面上项目，主持
6. 基于含油污泥和铝渣合成多孔活性炭负载纳米氧化铝吸附材料的应用基础研究. 山东省自然科学基金青年项目(ZR2014EEQ022)，主持
7. 碱熔工艺资源化处理铝渣的基础研究. 中央高校基本科研业务专项（27R1504018A），主持
代表性论著
1. J.J. Chen, F. Zheng*, T. Yu, X.J. Gu, H.N. Wang, W.H. Deng, P. Li*,Y. Yu. Preparation of WO3 nanosheet arrays@Co3O4 nanoneedle arrays composite heterojunction as supercapacitor electrode material. Chemical Engineering Journal. 522 (2025) 167246.
2. P. Li, M. Zhang, and S. Seetharaman. Chapter 1.5 “Total Recycling of Dross in Aluminum Remelting ”of Book “Treatise on Process Metallurgy”. Elsevier, 2025.
3. X.F. Huang, Z.A. Sun, J. Fang, S.C. Deng, W. Zhao*, P. Li*, B.J. Yan, H.W. Guo, Q.W. Song. Effect of sintering behavior and phase evolution on glass-ceramics entirely derived from ferrochrome slag and fluorite tailings. Ceramics International, 50 (2024) 48724-48735.
4. P. Li, Z. Jiang, H.W. Guo, W. Zhao, F. Zheng, Y.J. Chen, B.J. Yan, D. Chen. Lithium based high temperature sorbent from copper slag: Synthesis and CO2 capture performance. Ceramics International. 2023, 49:37435-37444.
5. D.H. Jia, F. Zheng, Y.Y. Niu, X.D. Mao, Y. Yang, Q. Zhen, P. Li*, Y. Yu, S.W. Zhang. Preparation of V2O5 nanobelt arrays/NiO nanosheet arrays composite as supercapacitor electrode material. Journal of Alloys and Compounds. 2023,969:172283.
6. P. Li*, X.Y. Li, H.W. Guo, B.J. Yan, D. Chen, W. Zhao, S. Seetharaman. Understanding reactions between water and steelmaking slags: Iron distribution, hydrogen generation, and phase transformations. International Journal of Hydrogen Energy. 2022, 47:20741-20754.
7. H.Y. He, H.L. Liu, Y. Guo, Y. Li*, P. Li**, H. Zhang, T.T. Hu, H.W. Ni. Alkali-excited gel structure and compositions evolution in geopolymers synthesized from the spent FCC catalyst and steel slag. Journal of Materials research and Technology. 2022, 21:2663-2671.
8. P. Li*, Y.X. Chen, X.Y. Li, B.J. Yan, D. Chen, H.W. Guo. Hydrogen generation characteristics of steel slag-steam high temperature reaction in terms of particle size. International Journal of Hydrogen energy. 2020,45(35):17140-17152.
9. P. Li, M.T. Yang, D. Chen*, H.W. Guo*, B.J. Yan. CO fuel and γ-LiAlO2 production through alkali carbonate-assisted CO2 splitting by reusing aluminum wastes. Journal of CO2 Utilization. 2020, 39:101168.
10. P. Li, X. Zhang, J. Wang, H.W. Guo, Y.X. Chen, Z.B. Wang, B.J. Yan, D. Chen. Process characteristics of catalytic thermochemical conversion of oily sludge with addition of steel slag towards energy and iron recovery. Journal of Environmental Chemical Engineering 8 (2020) 103911.
11. P. Li, H.W. Guo*, J.M. Gao*, J. Min, B.J. Yan, D. Chen, Seshadri Seetharaman. Novel concept of steam modification towards energy and iron recovery from steel slag: Oxidation mechanism and process evaluation. Journal of Cleaner Production, 2020, 254: 119952.
12. F.J. Pei, H.W. Guo, P. Li*, B.J.Yan, J.Li, P. Yang, G.H. Zhu. Influence of low magnesia content on the CaO-Al2O3-SiO2 glass-ceramics: its crystallization behavior, microstructure and physical properties. Ceramics International, 2018, 44(16):20132-20139.
13. H.W. Guo, J. Wang, X.X. Zhang, F. Zheng, P. Li*. Study on the Extraction of Aluminum from Aluminum Dross Using Alkali Roasting and Subsequent Synthesis of Mesoporous γ-alumina. Metallurgical and Materials Transactions B, 2018, 49(5):2906-2916.
14. P. Li, J. Wang, X.X. Zhang, X.M. Hou, B.J. Yan*, H.W. Guo, S. Seetharaman. Molten salt-enhanced production of hydrogen by using skimmed hot dross from aluminum remelting at high temperature. International Journal of Hydrogen Energy, 2017, 42(18): 12956-12966.
15. P. Li, M. Zhang*, Z.B. Wang, S. Seetharaman. BF slag resistance of β-Si3Al3O3N5 material derived from Al salt cake. Journal of the European Ceramic Society, 2015, 35(4):1307-1315.
16. P. Li, M. Zhang*, L.D. Teng, S. Seetharaman. Oxidation studies of SiAlON/MgAlON ceramicswith Fe2O3 and CaO impurities, part II: phase evolution (editors' choice). Metallurgical and Materials Transactions B, 2013, 44(1):220-232.
17. P. Li*, M. Guo, M. Zhang, L.D. Teng, S. Seetharaman. Leaching process investigation ofsecondary aluminium dross: The effect of CO2 on leaching process of salt cake from aluminum remelting process (editors' choice). Metallurgical and Materials Transactions B, 2012, 43(5):1220-1230.
获奖情况
1. 第九届全国高校冶金院长提名奖，2021年。
2. 第三届全国大学生冶金科技竞赛一等奖, 指导教师，教育部高等学校材料类专业教学指导委员会，2020年。
3. 本科毕业设计(论文)优秀指导教师，苏州大学，2020年。
4. 优秀青年学者，苏州大学，2018年，2021年。
5. Key Scientific Articles, Molten salt-enhanced production of hydrogen by using skimmed hot dross from aluminum remelting at high temperature, Renewable Energy Global Innovations, 2017年。
6. 优秀博士论文，北京科技大学，2014年。
7. Editors' Choice Article, Oxidation studies of SiAlON/MgAlON ceramics with Fe2O3 and CaO impurities, part II: phase evolution, Metallurgical and Materials Transactions B, 2012年。
8. Editors' Choice Article, Leaching process investigation of secondary aluminium dross: The effect of CO2 on leaching process of salt cake from aluminum remelting process, Metallurgical and Materials Transactions B, 2012年。
